Home / ELEGOO Mercury X Bundle-E Wash and Cure Station Simultaneous Working Add Bottom Light Source Fresnel Lens for LCD MSLA DLP 3D Printers UV Curing Box

ELEGOO Mercury X Bundle-E Wash and Cure Station Simultaneous Working Add Bottom Light Source Fresnel Lens for LCD MSLA DLP 3D Printers UV Curing Box

Essential for resin 3D printing ELEGOO Mercury X Bundle contains 1 washing station and 1 post-curing station, which completes your resin 3D printing experience for post-processing and allows you to wash and cure 3D prints at the same time, maximizing your throughput.

Washing larger prints easier With a 7.5Liters container, you can directly wash big parts 3D printed on ELEGOO Saturn and Mars 3 as well. Leave the prints on the build plate and set it on the hanger inside the bucket, then the parts will be washed in the stirring solvent removing all the residual resin.

Improve your print qualityWorking with Fresnel lens, they can emit the optimal 405nm wavelength of UV light and increase the quality of the resin 3D prints.

Intuitive and safe operation ELEGOO Mercury X Bundle adopts a sleek design using a single knob. Press and hold to turn on and off the machine then rotate the knob to set an appropriate time for washing and curing.

108 sold

Quantity

ADD TO CART

BUY IT NOW

Detail

ELEGOO Mercury X Bundle Wash and Cure Station

About Brand Vision

Create the future, interpreted as "With the help of programming and 3D printing technology, we can create almost anything. Elegoo provides geeks with the key to a new world."

ELEGOO Mercury X Cure

Fresnel Lens Design: This design can be used for the entire effective curing area, making the light power distribution more uniform.
360°Dimensional Curing Design: The curing platform can 360° rotate automatically. Curing Size is 200*260mm.
Bottom Light Source Design: A light source design is added to the bottom, the base area can also be cured, which cures the model all the angle.
Anti-UV Cover: Mercury X Cure is equipped with a transparent yellow hood, which effectively blocks 99.9% of UV light.

ELEGOO Mercury X Wash

Seal Cleaning: Mercury X Wash adopts a sealed cleaning method and is equipped with a rubber sealing strip, which is very safe to use.
Big Wave Wheel: The high-power pulsator makes a stronger water flow during the cleaning process to clean the model in all directions.
Large Capacity Design: Mercury X Wash adopts 8000ml large capacity design, the largest washing size is 201mm*124mm*255mm(without platform), which is suitable for screens smaller than 9.1 inches, such as elegoo mars series and saturn series.
Two Ways for Cleaning:
1. Basket Washing: Remove the model and put it into the basket for direct cleaning;
2. Hanging Cleaning: Hang the printing platform directly on the cleaning basket for cleaning to reduce resin exposure.

Notice

Please read the user guide carefully before use, and strictly follow the instructions to accurately install the UV lamp and sensor interface on the lamp post.
Cleaning Time Setting: For model with a diameter less than or euqal to 30mm, it is recommended to clean the models for 1 minute.
Curing Time Setting: For model with a diameter less than or euqal to 30mm, it is recommended to clean the models for 2 minutes.
If the surface of the mode is complex, it is recommended to increase the cleaning time appropriately.
The ambient temperature of the ELEGOO Mercury X Cure machine is recommended to be 0°- 40°, and the humidity is 20% to 50%.
Please wash and dry the model first before curing, otherwise, the model would be covered with some white residues, sticky and cracked.
Please adjust the curing time appropriately if the model turns yellow after curing. Over curing will lead to the model yellowing.

Customer Reviews

SEE ALL

Detail
ELEGOO Mercury X Bundle Wash and Cure Station
About Brand Vision

Create the future, interpreted as "With the help of programming and 3D printing technology, we can create almost anything. Elegoo provides geeks with the key to a new world."

ELEGOO Mercury X Cure

Fresnel Lens Design: This design can be used for the entire effective curing area, making the light power distribution more uniform.

360°Dimensional Curing Design: The curing platform can 360° rotate automatically. Curing Size is 200*260mm.

Bottom Light Source Design: A light source design is added to the bottom, the base area can also be cured, which cures the model all the angle.

Anti-UV Cover: Mercury X Cure is equipped with a transparent yellow hood, which effectively blocks 99.9% of UV light.

ELEGOO Mercury X Wash

Seal Cleaning: Mercury X Wash adopts a sealed cleaning method and is equipped with a rubber sealing strip, which is very safe to use.

Big Wave Wheel: The high-power pulsator makes a stronger water flow during the cleaning process to clean the model in all directions.

Large Capacity Design: Mercury X Wash adopts 8000ml large capacity design, the largest washing size is 201mm*124mm*255mm(without platform), which is suitable for screens smaller than 9.1 inches, such as elegoo mars series and saturn series.

Two Ways for Cleaning:

1. Basket Washing: Remove the model and put it into the basket for direct cleaning;

2. Hanging Cleaning: Hang the printing platform directly on the cleaning basket for cleaning to reduce resin exposure.

Notice

Please read the user guide carefully before use, and strictly follow the instructions to accurately install the UV lamp and sensor interface on the lamp post.

Cleaning Time Setting: For model with a diameter less than or euqal to 30mm, it is recommended to clean the models for 1 minute.

Curing Time Setting: For model with a diameter less than or euqal to 30mm, it is recommended to clean the models for 2 minutes.

If the surface of the mode is complex, it is recommended to increase the cleaning time appropriately.

The ambient temperature of the ELEGOO Mercury X Cure machine is recommended to be 0°- 40°, and the humidity is 20% to 50%.

Please wash and dry the model first before curing, otherwise, the model would be covered with some white residues, sticky and cracked.

Please adjust the curing time appropriately if the model turns yellow after curing. Over curing will lead to the model yellowing.
Customer Reviews

SEE ALL

BACK